Do you know XTUNER CVD-9 HD Truck Diagnostic Tool?Quickly know XTUNER CVD-9= truck diagnostic scanner (Adapter), work with Android phone via Bluetooth, support many trucks= first in the world!
- 6月 29 週四 201715:08
XTUNER CVD-9 HD Truck Diagnostic Tool for Android: the FIRST
Do you know XTUNER CVD-9 HD Truck Diagnostic Tool?Quickly know XTUNER CVD-9= truck diagnostic scanner (Adapter), work with Android phone via Bluetooth, support many trucks= first in the world!
- 6月 27 週二 201715:30
SKP900 V5.0 program key for Toyota Corolla all key lost OK
A success case for sharing: I newly update my SKP900 Key Programmer to latest V5.0. Tested it OK to program a new key for Toyota Corolla all key lost! If you need, I listed how-to steps as below:- 5月 15 週一 201715:34
OPCOM Firmware 1.70 1.65 1.59 1.45 1.39 PCB Download Free
Opel Opcom PCBs for you! 2017 new Opcom firmware v1.70 v1.65 and old Op-com v1.59 v1.45 v1.39 PCBs all available… Here you go.- 5月 15 週一 201715:33
How to program Code Index Opel Zafira B by OPCOM V1.70?
Here you will know how to program Opel Zafira B Code Index by OPCOM Firmware 1.70? Check step by step as below:- 4月 26 週三 201710:21
Autel MS908 diagnose Land Rover Evoque 2014 reset Service Interval
This is a guide to fully diagnose 2014 Land Rover Evoque L538 and reset Land Rover Service Intervals using Autel MaxiSys MS908. Hope it helps!- 4月 26 週三 201710:19
How to update Renault CAN CLIP V166 Windows XP
RenaultCAN CLIP V166 update successfully on the XP system! This is the test report of Renault CLIP v166, via professionals working for http://www.eobdtool.co.uk/- 4月 20 週四 201716:51
How to do Mondeo module / key programming by VCM IDS 3 V104.04?
Have Ford Mondeo Duratech-HE/I4 Gasoline to do OBD test, key programming, module programming, reprogramming, service function, etc. Best tool to use is VCM IDS 3 V102.01 (or latest V104.04). This post topic: If you have a hard time installing the IDS software, this post can shed some light on "how to make the software 102.01 work”.- 4月 20 週四 201716:50
Why I choose MB SD C4 MUX+ V2017.03 Xentry+ Lenovo T410 kit?
I recently bought an entire kit MB SD C4 MUX+ V2017.03 DAS Xentry HDD+ Lenovo T410laptop for my Mercedes repair shop. This kit is very useful and practical to earn my living!Below I list some reasons why I choose this kit for your reference. Maybe you will also like it!
- 4月 15 週六 201714:25
Foxwell NT510 same as Schwaben tool from ECS
Got home late and I had an Foxwell box staring at me on my whatever you call it a desk. So far I'm really impressed, this is not junk, this is a dealer OE professional tool, quality is bang drop rugged shock resistant, the display is a very good quality TFTJust updated the software, I can tell you guys strait up this is a INPA and BT Tool all in one plus more. No VIN locks, you can actually SAVE VIN with their associated modules.
It does a damn good job of identifying the car by scanning the VIN and it will pull all the "specifics" about your car.
The hard part is having it scan all your modules in the beginning for the first time. Better have a battery charger. After it has completed scanning all modules it maps them out and you save them to your VIN.
Ok, I just went through just about everything on this device. It is, without doubt, very similar to the BT Tool and INPA in regards to enabling/disabling modules, clearing shadow codes, scanning and clearing modules codes and resetting adaptations.
Instead of searching for errors for the overall vehicle health you can just have it scan each module automatically for error codes and address whatever it is.
Keep in mind this is a diagnostic and maintenance tool, so don't compare it to COBB or MHD flashers which have superior capabilities for channel logging in which MHD is by far the best at doing. This scan tool lacks logging all 6 cylinders, and this is a must for the BMW community, however, not a need if its already being done with the flasher devices.
Non of the flashers have the feature to log and access the TCU performance for 6AT/DKG/DCT transmissions. I am sure MHD can add these, but right now not available in MHD but available in this tool
I was unable to test out the ABS-DSC modules, it kept freezing. I sent a ticket in on this problem with it. On my Mini Cooper it works flawlessly though.
Currently the "Service" option is not available, where you can reset service counters, and manipulate dates for service due dates or to see if your coming near a due maintenance. The BT Tool has this. This scan stool is setup for it but the software has not been implemented yet
There is no coding availability. The hardware DOES support it, but there is no software support at this time. The only things that can be done with Injectors is enabling disabling for whatever reason for testing. I will still go back over the tool again to confirm hoping I didn't miss something as its a lot of stuff to comb through, but I'm pretty sure no coding support at this time.
I will still follow up with a video walk through, it definitely better than getting a BT tool that locks VIN and not progressive about their software or hassling with INPA which is a challenge to use for those who lack in certain PC skills. However, Foxwelltool NT510 is very supportive and active in the community so I am sure with some push this scanner will be up to par with the community's needs.
I would also like to correct myself, the expected update has not been released yet. The update I ran was an older update from 2015. So all of this is probable going to be addressed in the expected update that was mentioned before.
- 4月 06 週四 201714:25
OBDSTAR X300 DP PAD Feedback Yes and No
